Made in USA Garden and College Windmills. Eight foot metal.
eTech n Stuff
Shopcart Checkout

Home > Store > Yard and Garden Windmills

     Page 1 of 3 1 2 3 ·  Next
Mini Grease Gun - White Lithium Grease
I looked all over for a kit that has a mini grease gun and the best grease for both the aluminum and the galvanized steel garden windmills - the mini grease gun is very common packaged with a tube of multipurpose lithium based grease which work OK however this grease is dark colored and tends to get on the blades.  You can get packages of White (clear) lithium grease - normally 4 tubes which will fit the mini grease gun.
 
I was able to locate a supplier of the mini grease guns and a supplier that has the 3 OZ white (clear) lithium grease and have now available a package that contains a 90 degree mini grease gun and a single 3 OZ white lithium grease tube.  The clear plastic package I was able to get is not an exact fit - however the mini gun and cartridge are exactly correct for the windmills.
Shipping is included in the lower 48 United States - there will be an added shipping charge for HI - AK - US Territories and all international addresses.

Price: $29.95


Click for larger image




D3- Minature 17 in Windmill Plain Tail
This 17" mini windmill is made in the midwest of the USA by a company that has been making these since 1946.  The wheel turns on Lubricant impregnated OILON Bearings, the top turns toward the wind on a brass bearing.Just like real windmills that used to be seen all over the Midwest this mini windmill turns toward the wind to show wind direction. These can be used outside, on your patio, in a rock garden, as part of a planter display, in a window box or on your rural mailbox. It can also be used inside on a desk or mantel, part of a toy farm set or model train layout (it is fairly close to G scale - and would look OK with an 027 layout). You probably could mount these on an apartment window sill or balcony rail for those wanting to bring a small piece of the country to the city.As with our 8 foot and 4.5 foot windmills there are cheap Chinese copies out there that plain and simply are not the same quality. Beware of the cheap Chinese copy windmills!! This mini windmill is Made in the USA, the detail and quality are excellent. This windmill arrives in a 15" X 6" X 2" box and requires assembly. Assembly is sort of like working with the old Gilbert Erector kit only with smaller bolts and nuts. It takes around 2 hours to put one of these together. There are complete instructions and a full size drawing included. We are including a FREE "pocket" screwdriver with each kit that is a must have for assembly.
 
Here is a link to some photos, hints and tips on how to assemble a 17 inch windmill  - if after looking over how to assemble one of these you feel this may be beyond what you can do, I can pre assemble the tower for you.
 
These mini 17 inch windmills are a perfect gift. They actually work and can be left outside. You will need to anchor the legs down to something solid if you have them outside.
 
There is now a Powder coated steel base available for placing the mini windmill on a shelf or table.  This base has rubber feet and mounting tabs to secure the windmill base.
 
Be sure to take a look at our other windmills - all made in the USA. We have an  8' models steel windmill and 4 - 6 - 8 - 10 - 12 - 18 - 22 and 30 foot premium aluminum windmills.
 
There are now 14 different models available.
 
The cost shown Includes Shipping anywhere in the USA.  We do ship worldwide for International Shipping Costs see the chart on the International Shipping Page
 
Click HERE for check out information.


Free counters provided by Andale.


Price: $32.95 - $59.85

Click for larger image




17" Mini Windmill Aero Tail

This 17" mini windmill is made by a Midwestern USA company that has been making these since1946.  Galvanized steel - Red Trim.  This little windmill is 17 inches tall and has a 5 inch wheel.  The wheel turns on Lubricant impregnated OILON Bearings, the top turns toward the wind on a brass bearing.

This is the Aero  tailed mini windmill.  Be sure to see the rest of the17" mini windmills we carry.  We now have 15 models available.  Start your own collection. Click on the Title to see a larger photo.
 
The mini windmill comes in a 15X6X2 inch box and requires assembly -  it takes about 2 hours to assemble and is sort of like working with an old Gilbert erector kit only with smaller bolts and nuts.  There are complete instructions as well as a full size drawing included.   I also include a Free pocket screw driver that is the correct size for the nuts. Click on this link 17 inch windmill assembly for some photos, hints and tips on how to put one of these together.
 
If after looking at the assembly information you feel that putting one of these together is beyond what you can deal with I can assemble the tower for you.  It takes me about 2 hours to assemble one of these and if you want the tower pre assembled for you there will be a 4-5 day delay in shipping.
 
There is now a powder coated steel base for the 17 inch windmills available.  The base has rubber feet and is specially made for placing the mini windmills on a shelf or table for indoor display.
 
The cost shown Includes Shipping anywhere in the USA.  We do ship worldwide for International Shipping Costs see the chart on the International Shipping Page
 
Click HERE for check out information.
 

Free counters provided by Andale.


Price: $32.95 - $59.85


Click for larger image




17" mini Windmill Texas Tail

This 17" mini windmill is made by a Midwestern USA company that has been making these since 1946.  Galvanized steel - Red, Blue & White Trim.  This little windmill is 17 inches tall and has a 5 inch wheel.  The wheel turns on Lubricant impregnated OILON Bearings, the top turns toward the wind on a brass bearing.

This is the Texas  tailed mini windmill.  Be sure to see the rest of the17" mini windmills we carry.  We now have 15 models available.  Start your own collection. Click on the title for a larger image.
 
The mini windmill comes in a 15X6X2 inch box and requires assembly -  it takes about 2 hours to assemble and is sort of like working with an old Gilbert erector kit only with smaller bolts and nuts.  There are complete instructions as well as a full size drawing included.   I also include a Free pocket screw driver that is the correct size for the nuts. Click on this link 17 inch windmill assembly for some photos, hints and tips on how to put one of these together.
 
If after looking at the assembly information you feel that putting one of these together is beyond what you can deal with I can assemble the tower for you.  It takes me about 2 hours to assemble one of these and if you want the tower pre assembled for you there will be a 4-5 day delay in shipping.
 
There is now a powder coated steel base for the 17 inch windmills available.  The base has rubber feet and is specially made for placing the mini windmills on a shelf or table for indoor display. 
 
The cost shown Includes Shipping anywhere in the USA.  We do ship worldwide for International Shipping Costs see the chart on the International Shipping Page 
 
Click HERE for check out information.
 

Free counters provided by Andale.


Price: $37.95 - $64.85


Click for larger image




Kansas The Sunflower State 17" Mini Windmill

This 17" mini windmill is made by a Midwestern USA company that has been making these since 1946.  Galvanized steel - Red Trim.  This little windmill is 17 inches tall and has a 5 inch wheel.  The wheel turns on Lubricant impregnated  OILON Bearings, the top turns toward the wind on a brass bearing.

This is the Kansas The Sunflower State  tailed mini windmill.  Be sure to see the rest of the 17" mini windmills we carry.  We now have 15 models available.  Start your own collection. Click on the Title to see a larger photo.
 
The mini windmill comes in a 15X6X2 inch box and requires assembly -  it takes about 2 hours to assemble and is sort of like working with an old Gilbert erector kit only with smaller bolts and nuts.  There are complete instructions as well as a full size drawing included.   I also include a Free pocket screw driver that is the correct size for the nuts. Click on this link 17 inch windmill assembly for some photos, hints and tips on how to put one of these together.
 
If after looking at the assembly information you feel that putting one of these together is beyond what you can deal with I can assemble the tower for you.  It takes me about 2 hours to assemble one of these and if you want the tower pre assembled for you there will be a 4-5 day delay in shipping.
 
There is now a powder coated steel base for the 17 inch windmills available.  The base has rubber feet and is specially made for placing the mini windmills on a shelf or table for indoor display.  
 
The cost shown Includes Shipping anywhere in the USA.  We do ship worldwide for International Shipping Costs see the chart on the International Shipping Page 
 
Click HERE for check out information.


Price: $37.95 - $64.85


Click for larger image




New Mexico 17" mini windmill

This 17" mini windmill  is made by a Midwestern USA company that has been making these since 1946.  Galvanized steel - Red Trim.  This little windmill is 17 inches tall and has a 5 inch wheel.  The wheel turns on Lubricant impregnated OILON Bearings, the top turns toward the wind on a brass bearing.

This is the New Mexico  tailed mini windmill.  ( Yellow & Red tail) Be sure to see the rest of the 17" mini windmills we carry.  We now have 15 models available.  Start your own collection. Click on the Title to see a larger photo.
 
The mini windmill comes in a 15X6X2 inch box and requires assembly -  it takes about 2 hours to assemble and is sort of like working with an old Gilbert erector kit only with smaller bolts and nuts.  There are complete instructions as well as a full size drawing included.   I also include a Free pocket screw driver that is the correct size for the nuts. Click on this link 17 inch windmill assembly for some photos, hints and tips on how to put one of these together.
 
If after looking at the assembly information you feel that putting one of these together is beyond what you can deal with I can assemble the tower for you.  It takes me about 2 hours to assemble one of these and if you want the tower pre assembled for you there will be a 4-5 day delay in shipping.
 
There is now a powder coated steel base for the 17 inch windmills available.  The base has rubber feet and is specially made for placing the mini windmills on a shelf or table for indoor display.  
 
The cost shown Includes Shipping anywhere in the USA.  We do ship worldwide for International Shipping Costs see the chart on the International Shipping Page 
 
Click HERE for check out information.


Price: $41.95 - $68.85


Click for larger image




     Page 1 of 3 1 2 3 ·  Next

Categories:

Aluminum Windmills and More
Farm Collectibles
Weather vanes
Yard and Garden Windmills

eTech n Stuff
PO Box 892
Georgetown, KY  40324
Phone: 502 570 5974
Fax: 502 863 6404


Store Hours 9AM - 5 PM Mon-Fri Closed Sundays & Holidays
© Copyright 2014 - eTech n Stuff
Privacy Policy