Made in the USA 14 gauge laser cut zinc chromate plated steel.  Baked on beautiful Antique Copper powder coat, with a clear baked on powder coat for a scratch and UV resistant finish.  The top is 21 inches from the tip to the tail of the arrow and vary in height from 6 inches to 12 inches depending on the design.  The top shows the wind direction, below the top is a 4 cup Anemometer that spins freely on a sealed ball bearing.  Next is the NSEW directional that is held in place with a set screw.  You can choose between 4 different mounts-- CLICK TO SEE MOUNTS - roof mount conforms to any roof pitch  ----- Post mount attaches to any vertical surface and is 3" by 3" -----Deck mount attaches to any horizontal surface and is 3" by 3" ------- Garden stake is 60 inches high and slides over a ground stake or pushes into the ground.

There is no photo available for this item.

Made in the USA 14 gauge laser cut zinc chromate plated steel.  Baked on beautiful Antique Copper powder coat, with a clear baked on powder coat for a scratch and UV resistant finish.  The top is 21 inches from the tip to the tail of the arrow and vary in height from 6 inches to 12 inches depending on the design.  The top shows the wind direction, below the top is a 4 cup Anemometer that spins freely on a sealed ball bearing.  Next is the NSEW directional that is held in place with a set screw.  You can choose between 4 different mounts-- CLICK TO SEE MOUNTS - roof mount conforms to any roof pitch  ----- Post mount attaches to any vertical surface and is 3" by 3" -----Deck mount attaches to any horizontal surface and is 3" by 3" ------- Garden stake is 60 inches high and slides over a ground stake or pushes into the ground.

MOUNT

Roof Mount $49.95 Garden Stake $49.95 Deck Mount $49.95 Post Mount $49.95

Free counters provided by Vendio.

Made in the USA 14 gauge laser cut zinc chromate plated steel.  Baked on beautiful Antique Copper powder coat, with a clear baked on powder coat for a scratch and UV resistant finish.  The top is 21 inches from the tip to the tail of the arrow and vary in height from 6 inches to 12 inches depending on the design.  The top shows the wind direction, below the top is a 4 cup Anemometer that spins freely on a sealed ball bearing.  Next is the NSEW directional that is held in place with a set screw.  You can choose between 4 different mounts-- CLICK TO SEE MOUNTS - roof mount conforms to any roof pitch  ----- Post mount attaches to any vertical surface and is 3" by 3" -----Deck mount attaches to any horizontal surface and is 3" by 3" ------- Garden stake is 60 inches high and slides over a ground stake or pushes into the ground.

MOUNT

Roof Mount $49.95 Garden Stake $49.95 Deck Mount $49.95 Post Mount $49.95

Free counters provided by Vendio.